鋁合金屬1.4313是馬氏體級，耐結垢性強，熱治理后耐久力性好。X3CrNiMo13-4鋼的機戒特點是仍然生物學完分中鉬和鎳的高占比。這么多合金屬加劑影響了增大級碳占比的要有——給定溶度等同于于奧氏體鋁合金屬。也許鎳占比較低，但鎳占比約為4%，顯著性提高自己了鋼對種種結垢情況的忍受力——第二次機戒特點。X3CrNiMo13-4鋼我們可生孩子獨角獸高達300℃在溫濕度下事情的產品圖和產品圖，一些爆出在種種結垢情況中的產品圖，一并增加夠了的面因素括抗氯化物特性)。QT650.QT780和QT900因素下，熱治理后常用交房槽鋼。半樣品廣泛用于國際石油生孩子.煤化工.在有色金屬和電力能源餐飲行業，鍋輪機爆出在高溫文爾雅超高溫下.泵.擠壓機機件。鋼隱疼合焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50提供EN1.4313馬氏體不銹鋼304具去應力退火特征（+A）階段、熱處理和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，須得哪一款很大要跟渠道說非常清楚哦。